reer Colour SkinTemp 98070 3-in-1 non-contact thermometer

reer Colour SkinTemp 3 in 1 98070 -Non-contact infrared thermometer -Forehead body temperature measurement from a distance of up to 3 cm -Separate surface and ambient temperature mode -Child mode for 0–36 months and mode for 36 months and up -Memory for the last 25 measurements -Backlit screen and option to mute the signal -new condition The reer Colour SkinTemp 3 in 1 98070 is a non-contact infrared thermometer for measuring body temperature on the forehead, with a separate mode for measuring surface and ambient temperature. When measuring body temperature, the thermometer should be no more than 3 cm from the forehead. The switch lets you select child mode for 0–36 months or mode for ages 36 months and up. The device stores the last 25 readings, has a backlit screen and can be muted. Do not use object/ambient mode to assess fever. The thermometer reading does not replace a medical examination; consult a doctor if there is a high fever or unclear readings. Care and safety Verified translation and organization of the manufacturer's instructions (English version, PDF pages 9–11). Before first use and batteries: make sure the sensor is clean, as dirt may cause inaccurate readings. Open the battery compartment on the underside of the device, insert two 1.5 V AAA batteries with the correct polarity, and close the compartment. Do not use different types of batteries or mix new and used batteries. The power requirement does not confirm that batteries are included with a specific item. Measuring body temperature: the device is designed for forehead measurements; measuring another part of the body may produce inaccurate readings. Use the side switch to select child mode for 0–36 months or adult mode for ages 36 months and up. Turn on the thermometer by briefly pressing the button. After the startup sequence, a dashed line appears and the temperature unit flashes. Position the thermometer no more than 3 cm from the forehead, start the measurement by pressing the button, and read the temperature after the signal. Measurement notes: check that the sensor is clean before each measurement and clean it as needed according to the recommendations below. Vasoconstrictor medicines may affect the reading. Portable and mobile communications devices may also affect the thermometer. Wait at least 30 minutes after exercise, bathing or eating. Use indoors; wind and outdoor temperature may affect the reading. If the device is to be used in extreme temperature conditions, keep it at room temperature for at least 1 hour before measuring. Holding the thermometer in your hand for too long before measuring will warm it and may distort the reading. Colour indicator: in child mode for 0–36 months, the device's green range is 32.0–37.2°C, orange is 37.3–37.9°C, and red is 38.0–43.0°C. W mode for ages 36 months and up, the green range is 32.0–37.4°C, orange is 37.5–37.9°C, and red is 38.0–43.0°C. Below 32.0°C, Lo is displayed; above 43.0°C, Hi is displayed. The green and orange ranges correspond to one long signal, and the red range to six short signals. These are device indications and do not replace a medical examination. W If the indicator is red, monitor the temperature and, if in doubt, in the case of a high fever or an unclear reading, contact a doctor. Measuring objects and ambient temperature: select the appropriate mode using the switch, point the sensor at the object, and press the measurement button. W When possible, measure liquids from the outside of the container to prevent condensation on the sensor. W In this mode, the fever alarm is disabled and the screen lights up green. The reading indicates the surface or room temperature; do not use this mode to assess fever. Audible signal: with the thermometer switched off, press and hold the button for about 12 seconds until ON or OFF appears. Press the button again to select the mode, then press and hold it for about 3 seconds to save your selection. Memory: with the thermometer switched off, press and hold the button for about 5 seconds until MEM appears. Press the button repeatedly to review the last 25 readings, starting with the most recent, numbered 1. When the memory is full, the oldest reading is automatically deleted and the new one is saved. For body temperature readings, the screen shows the corresponding colour. To exit the menu, leave the device until it switches off automatically. To clear the memory, remove the batteries, then press and hold the button while reinserting them until ---- appears. Units: with the thermometer switched off, press and hold the button for about 8 seconds until C or F appears. Press the button again to select the scale, then press and hold it for about 3 seconds to save your selection. Cleaning and care: the sensor is the most delicate part of the device. Do not touch or scratch its surface. If the sensor is dirty, carefully and gently wipe it with a cotton swab moistened with alcohol or a mild cleaning agent, such as highly diluted dish soap. Do not use harsh cleaning agents on the sensor. Clean the housing and display with a soft, dry cloth or an alcohol wipe. The device is not waterproof: do not immerse it in water or expose it directly to moisture. Remove the batteries if the device will not be used for an extended period. The product requires no special maintenance. Repairs may only be carried out by a qualified specialist. Store the thermometer in a dry place, free of dust and dirt, away from direct sunlight. Troubleshooting: if the device does not turn on, replace depleted batteries and check their position and polarity. If readings are inaccurate or inconsistent, check the sensor and clean it if necessary. If the low battery indicator appears, you can continue measuring, but the batteries should be replaced soon. If Hi or Lo appears, check that the correct measurement mode is selected, repeat the measurement, and make sure the sensor is positioned correctly. Operating conditions: ambient temperature 10–40°C, relative humidity 15–95%, air pressure 70–106 kPa. Storage conditions: ambient temperature from -25°C to 55°C and relative humidity 15–95%. After use, clean or store the product according to the recommendations for the specific model. Use as intended and in accordance with the manufacturer's recommendations. Check the product's condition regularly; discontinue use if it is damaged. Manufacturer's warnings — verified translation into Polish IMPORTANT! READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE. Safety instructions. Before using the device, carefully read the following points and follow the instructions. DANGER • Choking hazard! Keep batteries out of children's reach. • W If a battery leaks, remove it while wearing chemical-resistant protective gloves and safety goggles. • W In the event of a high fever or unclear measurement results, always consult a doctor. • The infrared technology used in the reer thermometer is completely safe. Although looking through the lens while measuring temperature is not harmful, it is not recommended. WARNING • Before each use, check the device for visible damage. W If damage is found, do not use the device. • Always observe the minimum measurement time, until you hear the audible signal. • Avoid extreme heat and direct sunlight. • Do not expose the device to mechanical shocks. • Do not open the device, except for the battery compartment cover, as this may cause electric shock. If the device malfunctions, DO NOT attempt to repair it yourself. W In this case, contact the seller. • The device is not waterproof, so do not immerse it in water or expose it directly to any liquids. • Do not immerse the device in water, other liquids or flammable detergents to avoid the risk of electric shock and/or fire. CAUTION • Use the device only as intended. • The device is intended for private use only, not commercial use. • This product is not a toy! Do not allow children to play with the device. • Do not use the device outdoors. • Remove all packaging materials before use. • Protect the measuring sensor lens from dirt and damage. • Depending on the course of the fever, internal body temperature, measured rectally, may be significantly higher than the surface temperature measured at the temple. • Measuring internal body temperature using a rectal medical thermometer is recommended: if the measurement result is unexpectedly low; for newborns during the first 100 days of life; for children under 3 years of age with a weakened immune system; or if a fever occurs or does not occur when it would be expected to occur or not occur. Additional restrictions from the measurement instructions: If the device's LED lights up red during measurement, continuously monitor the person's body temperature and consult a doctor if in doubt. Using the device does not in any way replace a medical examination. W In the event of a high fever or unclear measurement results, always consult a doctor. Object/ambient temperature measurement mode shows only the surface or room temperature and does not provide information about body temperature. This mode therefore cannot be used to measure fever. FAQ From what distance should body temperature be measured? From no more than 3 cm from the forehead. Measuring another part of the body may produce an inaccurate reading. Can object mode be used to measure fever? No. It shows the surface or room temperature, not body temperature. How long should I wait after bathing, eating or exercising? The instructions specify at least 30 minutes. After exposure to extreme temperatures, the thermometer should be kept at room temperature for at least 1 hour before measuring. Specifications Shipping time: 24 hours Safety documents InstructionsColourSkinTemp98070/A202F, ENpages7–12: https://www.reer.de/media/c3/f4/1b/1706601766/98070_ColourSkinTemp_Manual_2023-09-18_low.pdf